-
ideal torque range, 2-16 Nm (17,7-141,6 inch-pound)
this is the best torque range for precision bicycle applications and
'sensitive' components. 2 Nm is good for small aluminum screws, 16 Nm
is enough for big M6 bolts used in some seatposts. A wider scale
wouldn't allow the same precision at the range extremes. In use, always
refer to the suggested (on technical documentation or on the part
itself) torque values;
- extremely user-friendly:
- set the maximum torque rotating the handle terminal, reading the torque on the tool-window (graduate scale with 0,5 Nm increments);
- insert the appropriate bit (depending on the bolt you need to tighten)
- using the tool, a loud 'CLICK' and a 3° free-movement tells when the torque has been reached
- ready to use, with 16
bits included:
16 bits (standard 1/4" inch size fitting) are provided with the key,
allowing to use the torque-wrench on
almost any screw present on modern bicycles. A 70mm long '5' hex bit
allows to tighten road-brake levers recessed bolt. All bits are
manufactured from S2 special steel, with very high (62 Hrc) surface
hardness, to ensure maximum durability;
-
lightweight
& strong:
the light aluminum body keeps the weight down to a record-breaking 169g
per key, less than half the weight of heavy industrial wrenches often
used for bicycles. This is paramount to get the right
torqueing sensitiveness at low torque values,
without mistaking the effort to hold the tool with the applied torque.
Adjustment knob and bit-holder are made out of steel, to better stand
daily use;
-
professional
precision:
torque tolerance is +-4%, according to UNI EN ISO 6789:2004 norm
(calibration certificate with SIT reference is available upon
request).
-
calibration service:
the +-4% tolerance is guaranteed for 5000 cycles (5000 'clicks'), then
the wrench
should be re-calibrated. Calibration is a service we offer
in our
laboratories at the cost of 35€ plus shipping expenses (may vary
depending on the countries). After every calibration, the tolerance of
+-4% over nominal value will extend for 5000 cycles. After calibration,
the wrench will
return to the customer with a calibration certificate;
-
a state-of-the
art tool, made in Italy:
functional, linear in design and precise in any detail: shouldn't be a
surprise to know that Giustaforza 2-16Nm has been conceived and
produced in Italy. The tool is hard-anodized with laser-etched
iscriptions, and it's built to last. Each sample is checked and
numbered as a single masterpiece;
-
easy and safe to
carry:
the safety package protects the tool from shocks and keeps the overall
size
down to 17x4x4 cm.
click to enlarge this exploded view
165mm long, weighting just
169g
setting the desired torque
(Nm) could not be easier
bits are kept in place by
a magnetic holder, and are very easy to replace
16 bits are provided:
nothing is missing to work on modern bicycles
each wrench is numbered as
a 'unique' masterpiece
the shock-resistant,
minimalistic packaging maximizes transportation-safety